Product added to cart
Home
>
Inertia Devices
Inertia Devices
Inertia devices are initiating or firing devices for IEDs that employ a temporarily fixed conductive metal object—a moveable bridging contact that can slide forward to close a circuit, for example, upon braking of a vehicle --or impact with a solid object.
Securesearch manufactures several types of inertia switches, including some in metal housings and others in clear plastic housings. We also sell commercially-made inertia switches.
We incorporate them into several inert but functional IED training models. The switches can be purchased separately, or as initiating systems built into our complete IED training aids.
Securesearch manufactures several types of inertia switches, including some in metal housings and others in clear plastic housings. We also sell commercially-made inertia switches.
We incorporate them into several inert but functional IED training models. The switches can be purchased separately, or as initiating systems built into our complete IED training aids.
- per page
Inertia Devices
ATTACHE CASE BOOBYTRAP
Order Sku: ITA-167
Attache case boobytrap. Variety of anti-handling switches built in to make moving or lifting very difficult and hazardous. Different contents from those contained in training aid ITA-138. Manual arming switch, no time delay. Anti-lift, anti-tilt, and anti-inversion, and submersion.
Price: Request Quote
TAMPER CUT OFF CODE - TAMPER SWITCH IED
Order Sku: ITA-235
This IED contains many different types of switches, such as:
- Tilt switches( MERCURY)
- Key code switch with relay
- Micro switches (on the bottom of the box)
- Improvised barrier switch using wire solder. Wire solder that wraps around the box is .020 inches in diameter
- Copper binding post on the top of the box; wire or solder is used to secure the top, to prevent it from opening.
- Improvised clothespin switch used for arming the IED
Price: Request Quote
TUBE AND BALL SWITCH
Order Sku: ITA-474
Tube and ball. Demonstrates the operation of a bomb which has been booby-trapped with a tube and ball switch. Device will initiate when tilted.
Price: Request Quote
TUBE AND BALL SWITCH INITIATED IED DEMONSTRATOR
Order Sku: ITA-47A
Tube and ball switch initiated IED demonstrator. This model demonstrates the operation of an IED which has been booby-trapped with a tube and ball switch. The device will initiate when tilted sufficiently to cause the ball bearing in the plastic tube to roll against the contacts, bridging them.
Price: Request Quote
INERT BOOBYTRAPPED BABY CARRIAGE IED
Order Sku: ITA-503
Boobytrapped baby carriage
Price: Request Quote
Boobytrapped and Time Delay Initiated Video Camera
Order Sku: ITA-505
Boobytrapped and time delay initiated video camera. Built into a current model of half inch video camera. Comes with rechargeable batteries and recharger for 110-120 line voltage. North American TV standard only. Special orders requiring PAL and SECAM units may be available at higher cost. Video camera is fully functional and contains batteries, delay device, several boobytrap devices, and sheet explosive.
Price: Request Quote
Double-ball-in-tube initiated IED parcel
Order Sku: ITA-73
Double-ball-in-tube initiated IED parcel. This device is similar to ITA-72 and to ITA-47A in operation, but uses an improvised tube tilt switch containing two ballbearings. This makes it much more unpredictable, sensitive, and dangerous in operation. It creates redundant switching, tending to make a boobytrap device fail safe if the components are carefully assembled.
IEDs with multiple ball switches are very dangerous to move, and this training aid illustrates why.
IEDs with multiple ball switches are very dangerous to move, and this training aid illustrates why.
Price: Request Quote
ELECTRONIC INERTIA SWITCH MODEL
Order Sku: ITA-BC-1-4
Electronic inertia switch model, pendulum and ball-in-tube
Price: Request Quote
MERCURY TILT SWITCH
Order Sku: ITA-BC-2-03
Mercury tilt switch, electrical inertia pendulum switch, anti-lift microswitch.
Price: Request Quote
PLASTIC TOOLBOX WITH CHEMICAL FRICTION
Order Sku: ITA-BC-2-07
Chemical friction switch in plastic toolbox, with 555 delay timer countdown switch, anti-lift pendulum switch, mercury switch, anti-lift microswitch, in plastic tool box.
Price: Request Quote
METAL TOOL BOX WITH PRESSURE SENSITIVE SILHOUETTE KEYHOLE
Order Sku: ITA-BC-2-11
Pressure-sensitive silhouette (keyhole) switch in metal tool box, with ball bearing tilt switch, tripwire jerk-rod, anti-open microswitch.
Price: Request Quote
TEMPERATURE-SENSITIVE THERMOCOUPLE SWITCH WITH CIRCUIT BOARD
Order Sku: ITA-BC-2-24
Temperature-sensitive thermocouple switch with circuit board (anti-cryogentics), crush chemical-instigated (hypergolic) initiator, trembler anti-vibration switch, mechanical percussion striker switch with primer.
Price: Request Quote
- per page
Product Categories
Product Site Map
Your Cart
Cart is empty
Info Links
Bestsellers
-
ATTACHE CASE BOOBYTRAP -
BI-METALLIC STRIP SWITCH -
TEMPERATURE-SENSITIVE THERMOCOUPLE SWITCH WITH CIRCUIT BOARD -
TAMPER CUT OFF CODE - TAMPER SWITCH IED -
Boobytrapped and Time Delay Initiated Video Camera -
MERCURY TILT SWITCH -
METAL TOOL BOX WITH PRESSURE SENSITIVE SILHOUETTE KEYHOLE -
Double-ball-in-tube initiated IED parcel -
PLASTIC TOOLBOX WITH CHEMICAL FRICTION -
ELECTRICAL INERTIA SWITCH
